رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Counterclockwise shaft rotation direction
TXT
وصف:
Rotating Counter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.062 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.531 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.062 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Any acceptable
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Any acceptable
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
Any acceptable
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
Any acceptable
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
1
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
3 single register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.270 inches single register single tier
MRC:
The number of shaft revolutions required to make one count.ANRD
Shaft Revolutions Per Count:
0.10 single register single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
12000.0 per minute single register single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting.ANRL
Mounting Arrangement Style:
Four position square/rectangle
MRC:
The means used to return the register/s/ to original position.AXEC
Register Reset Method:
Any acceptable single register single tier
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add single register single tier and subtract single register single tier
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add and subtract single register single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Right side single register single tier
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 flange
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Panel rear single register single tier
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Drum
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
000 single register single tier and 999 single register single tier
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
000 and 999 single register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
1200.0 clockwise single register single tier and 1200.0 counterclockwise single register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
1200.0 clockwise and 1200.0 counterclockwise single register single tier
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black single register single tier figure background
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White single register single tier figure
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square/rectangular cased
