رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
0 width held at 0.0000 to minus 0.0030 in.From non-loading grooveside of outer ring to opposite of inner ring and 0.0000 in.To minus 0.0600 in.From loading groove side of outer ring to opposite side of inner ring facealso noise tested
TXT
وصف:
Annular Ball Bearing
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.1875 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
30.00 millimeters
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
72.00 millimeters
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Angular
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Standard
MRC:
The direction of the internal fit-up contact angle at point of contact.AGZK
Internal Fit-up Contact Angular Direction:
Inward convergent
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
28b loading groove, non-separable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Loading groove, non-separable
