رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two 0.098 in diameter through holes, 1.312in apart; 0.031 in chamfered both sides
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
Not rated
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
Not rated
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.370 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.062 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.500 inches
MRC:
The maximum load which can be applied normally to the plane of the material,per unit of cross-sectional area,that an item can withstand without fracture.ADZB
Flexural Strength:
Not rated
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, l-p-535, comp a, type 2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyvinyl chloride
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-p-535, comp a, type 2 federal specification 1st material response
