رقم الجزء 53X-04-191

Access Cover

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 425.4 and 574.29 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
53x-04-191
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
013569495

معلومات الجزء
In the middle of one edge along length there is a cutout section 1.840 in. Long by 0.500 in. Deep and the distance between holes along length, on this cutout edge, is 6.100 in. And 2.900 in.(note: this differs from the hole locations on the opposite edge)

NSN
رقم المخزون الوطني:
5340-01-356-9495 5340013569495
TXT
وصف:
Access Cover
INC
INC
رمز اسم العنصر:
29785
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.161 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.400 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
9.000 inches
MRC:
None.ADNV
Hole Quantity Along Length:
2
MRC:
None.ADNW
Hole Quantity Along Width:
4
MRC:
None.ADNY
Distance Between Holes Along Length:
6.100 inches and 2.900 inches
MRC:
None.ADNZ
Distance Between Holes Along Width:
6.000 inches
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
0.200 inches
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
0.200 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.120 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.120 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic acrylic

{lang[cimilar]} Access Covers

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى