رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5453-58in.x36yd.
معلومات الجزء
Ptfe glass colth tape
TXT
وصف:
Pressure Sensitive Adhesive Tape
MRC:
The appearance of the surface of an item as to its reflecting qualities.ABSW
Surface Luster:
Lusterless
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Heat resistant
MRC:
The minimum and maximum temperatures at which an item can be stored without detrimental effect.AFJQ
Storage Tempurature Range:
+60.0/+80.0 degrees fahrenheit
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.625 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
36.0 yards
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -100.0 degrees celsius and 400.0 degrees celsius
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
175 pounds per square inch
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.CRZG
Nominalthickness:
0.2 millimeters
MRC:
Indicates the location of the adhesive on the item.CSJX
Adhesive Location:
One side
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Adhesion to steel 55 oz. In.; tensile strength: 175 lbs.; backing thickness: 6.O mils; total tape thickness 8.2 mils; temperature use range minus 100 deg. F to plus 400 deg.F
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Brown
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene impregnation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone basic
