رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Permanent Magnet Loudspeaker
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2 and 1
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Tab, solder lug and connector, plug
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
3.438 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.250 inches
MRC:
A measurement of the amount of turning necessary to bring one half into coincidence with another,expressed in degrees.ABVJ
Angle Between Centerlines Of Mounting Holes In Deg:
90.0
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
6.125 inches
MRC:
The identifying numeric code of the originator that controls or manufactures the electrical connector receptacle.AEEE
Connector Manufacturer Code:
Any acceptable
MRC:
The identifying part number assigned to the electrical connector receptacle.AEEF
Connector Manufacturer Part Number:
Any acceptable
MRC:
The limits of permissible deviation over the specified frequency range,expressed in decibels.AFGR
Frequency Response Tolerance In Decibels:
-4.0/+4.0
MRC:
The limits of permissible deviation over the specified frequency range,expressed in decibels.AFGR
Frequency Response Tolerance In Decibels:
-4.0 to 4.0
MRC:
The additional parts supplied with the item which may be required for application.AFHR
Accessory Components:
Cord
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+320.0/+6000.0
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+320.0 to 6000.0
MRC:
The amount of electrical energy that can be dissipated.AJDB
Power Rating:
2.20 watts normal and 4.50 watts peak
MRC:
The length of a straight line which passes through the center of a circular transducer,and terminates at the circumference.AKNQ
Transducer Diameter:
7.0 inches
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
4
MRC:
Indicates the type of device that converts energy from one form to another.AKVS
Transducer Type:
Cone
MRC:
The radius of the circle in which the mounting facilities of an item are located.ALAQ
Mounting Facility Circle Radius:
2.868 inches
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Indoor
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Nonportable
MRC:
The total opposition /resistive and reactive/ which the item offers to the flow of alternating current,expressed in ohms.AWZH
Impedance Rating In Ohms:
8.0 voice coil
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-d-9415 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
