رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
9, 000 lbs; spindle speed 1750 rpm; variable speed control; wheel 1.5 in. Wd; throat maximum 17.125 in.; wheel hole 5.0 in.
TXT
وصف:
Recipro Surface Grinding Machine
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The length of a straight line which passes through the center of a spindle,and terminates at the circumference.AHDQ
Spindle Diameter:
2.000 inches
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
23.0 and 11.5
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
7.5
MRC:
The source of power which drives the item.ATJK
Power Source:
Electric motor
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Floor
MRC:
The maximum length of a straight line which passes through the center of the wheel,and terminates at the circumference.BNBW
Wheel Maximum Diameter:
14.000 inches
MRC:
The position of the spindle on the item.BPSG
Spindle Position:
Horizontal
MRC:
A measurement of the longest dimension of a work surface,in distinction from width.BPSK
Work Surface Length:
37.000 inches
MRC:
A measurement taken at right angles to the length of a work surface,in distinction from thickness.BPSM
Work Surface Width:
12.000 inches
MRC:
The longitudinal distance the work surface will travel.BPSP
Work Surface Longitudinal Travel:
47.500 inches
MRC:
The distance the work surface will extend from one side to the other.BPSQ
Work Surface Cross Travel:
13.750 inches
MRC:
The means by which materials are fed to the work surface.BPST
Work Surface Feed Method:
Power
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
18.000 inches
MRC:
The distance the head will extend from one side to the other.BPSY
Err Default:
Err default
MRC:
The distance the head will extend from one side to the other.BPSY
Head Cross Travel:
13.750 inches
MRC:
Indicates the type of head feed provided.BPSZ
Head Feed Type:
Power
MRC:
The maximum distance from the center or end of the spindle to the top of the work surface.BPTB
Maximum Distance From Spindle Center/end To Work Surface Top:
25.000 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 480.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
