رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Slot depth, 0.407, 0.469 in.
TXT
وصف:
Automotive Wh Side And Lock Ring
MRC:
The measurement between specified points of the slot,in distinction from height.AADJ
Slot Depth:
0.407 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rim side and lock ring slotted
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
20.000 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.625 inches
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.328 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.563 inches and 0.687 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 2.031 inches and 2.125 inches
MRC:
A designation indicating the size by which the item is commercially known and/or identified.AJXE
Size Designator:
20x7.33
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
1-1/4 in. C to c, 3/4 in. From end of locking ring to center of 1st hole on a 63-5/16 in. Bolt circle
MRC:
Indicates the design type of the item.APGF
Design Type:
Two-piece riveted
MRC:
The number of holes provided.ASXK
Hole Quantity:
2
MRC:
The distance around the inside surface of the item.BQYZ
Inside Circumference:
Between 60.156 inches and 60.344 inches
MRC:
An indication of whether or not a leverage slot is included.CDLT
Leverage Slot:
Included
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Zinc
