رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Inavy and drawing: buffer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.4 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.093 inches and 1.328 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.843 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
0.4 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
0.227 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.25 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Required to support p3 aircraft bomb rack
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Arched opening on left/short edge, 0.40 inches wide and radius of 0.40 on arch, centered 0.421 from top edge and 0.187 from left edge; unthreaded hole, 0.40 in. In dia, centered 0.421 in. From top and 0.749 in. From left edge; right side extends straight down for 0.14 in. Then tapers to 1.093 in. From left side at bottom
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, cl 2, ty a, gr 80 or gr 60 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
