رقم الجزء 5599204-1

Gasket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 79.72 and 107.622 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5599204-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
013232326

معلومات الجزء
The item has a second set of four bolt holes with a diameter of 0.413 inches minus 0.001 and plus 0.006 inches; the left end of has a 0.500 recesse from the length side and 1.50 inch recess from width side; the right side inside corners are 0.44 inches by 45 degrees and the left side inside corners have a 30 degree angle

NSN
رقم المخزون الوطني:
5330-01-323-2326 5330013232326
TXT
وصف:
Gasket
INC
INC
رمز اسم العنصر:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.467 inches and 0.474 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
36.380 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
21.000 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
34.625 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.0065 inches and 0.0135 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
30
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Paper
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm f104 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular

{lang[cimilar]} Gaskets

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى