رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Nsr: non standard range; housing material: 316 stainless steel; wetted parts material: 316 stainless steel and viton 0-ring; electrical connection size: 1/2in npt; operating temperature: -10 to 190 degrees fahreinheit
TXT
وصف:
Pressure Transmitter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.280 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Dc
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
8
MRC:
The means by which the item is actuated.AFLW
Actuation Method:
Diaphragm
MRC:
The number of contacts which provide electrical connection.AFRA
Contact Quantity:
3
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fltrn unit oily waste
MRC:
Indicates the type of contact(s) included on the item.AKSF
Contact Type:
Wire lead
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
8.5 volts input and 40.0 volts input
MRC:
The number of electrical connections provided.ASKX
Electrical Connection Quantity:
1
MRC:
The number of mechanical connections provided.ASSB
Mechanical Connection Quantity:
4
MRC:
Designates the thread size,diameter,or the like,of the mechanical connection.ASSC
Mechanical Connection Size:
0.718in diameter x 0.125in deep c bore, 1/4-18npt f
MRC:
Indicates the type of mechanical connection/s/ provided.ASSD
Mechanical Connection Type:
Thread
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded hole
MRC:
The minimum to maximum value which the item is capable of measuring.BHMW
Measurement Range:
+0.0/+50.0 pounds per square inch
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Bhmw
