رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
581-6985418-59
معلومات الجزء
Counter bore holes are on perimeter of 5.880 diameter at chord location (not at radial location). Spacing of fou (4) securing holes are 4.625 c/c horizontally and 1.750 c/c vertically
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
5.880 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 2.996 inches and 3.002 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.0000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Anchor handling drive assembly for nssn class submarine
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
4
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
180.0
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter,and the thread location.CQBP
Screw Thread Series Designator And Location:
All holes unc
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Threaded-counterbored all holes
MRC:
The number of screw threads on the item per linear inch,including incomplete threads,on a line parallel to the thread axis and the thread location.CQTP
Screw Thready Qty Per Inch (tpi) And Location:
13 all holes
MRC:
A measurement between specified points of a counterbore and the location.CQZD
Counterbore Depth And Location:
0.9655 inches all holes
MRC:
The length of a straight line which passes through the center of a counterbore,and terminates at the inside circumference,and the location.CRLR
Counterbore Diameter And Location:
0.7810 inches all holes
MRC:
A designation that is used for the purpose of general identification of the thread and the location.CRWB
Thread Size And Location:
0.500 inches all holes
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Nickel-copper alloy, qq-n-281, class a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round sectional
