رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
582-7067148-62
معلومات الجزء
Cover access, capstan grease
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.200 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.610 inches and 1.630 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Round, no holes
First Recess Inside Height:
0.840 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.200 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Flush catch
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; valve - capstan assembly
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Handle for opening, lifting, closing, or the like and special marking
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Cross-section slopes from 0.840 to 0.620; handle made from 1.25 diameter nicu wire formed into u-shape; words "capstan greasing" are centered in two rows on top in letters 0.18 inch high; there is 0.04-0.06 groove on underside centered horizontally between the words; 3 locking bars 0.62x0.25x0.09 on underside of cover, each extending 0.03 inch beyond outer circumference of cover
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a, form 1, cond hf federal specification single material response
