رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
28.0 to 32.0 degrees angle between i.D. And internal flange
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.3740 inches and 0.3760 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.2400 inches and 0.2500 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.1500 inches and 0.1560 inches
Left Internal Flange Hole Diameter:
Between 0.0950 inches and 0.0980 inches
Left Internal Flange Width:
Between 0.1840 inches and 0.1960 inches
Left Flange Outside Diameter:
Between 0.4930 inches and 0.4970 inches
Right Flange Outside Diameter:
Between 0.4190 inches and 0.4200 inches
Left Flange Width:
Between 0.0600 inches and 0.0700 inches
Right Flange Width:
Between 0.0750 inches and 0.0850 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6, 2024-t351 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18a-1 split, external flanges both ends, internal flange one end
