رقم الجزء 5857

Straight Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5857
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
007347853

معلومات الجزء
Two notches 0.562 in. W, 0.203 in. Deep located on 2nd end 2.480 in. C to c distance between notches, 1.000 in. From center of 1st notch to end, one unthd crossed drilled hole located 6.322 in. From 2nd end, 0.250 in. Dia, 0.500 in. Deep with 30 degrees countersink 0.438 in. Dia

NSN
رقم المخزون الوطني:
3040-00-734-7853 3040007347853
TXT
وصف:
Straight Shaft
INC
INC
رمز اسم العنصر:
22109
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved
MRC:
None.AAHW
Second End Groove Width:
0.3700 inches
MRC:
None.AAHX
Second End Groove Diameter:
0.6410 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.750 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.7470 inches
MRC:
None.AMFQ
Second End Distance From End To Groove:
2.750 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7470 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 1117 federal specification single material response

{lang[cimilar]} Straight Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى