رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Pin, quick release, positive locking, "l" handle, single action, detent wrench/safety pin slotted
TXT
وصف:
Quick Release Pin
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.600 inches
MRC:
The number of detents included in the item.ABRM
Detent Quantity:
2
MRC:
The means by which the item is actuated.AFLW
Actuation Method:
Push button
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
Between 2.625 inches and 2.645 inches
MRC:
Indicates the type of actuation provided.APCM
Actuation Type:
Push
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
64.0 rockwell c shank
Shoulder To Head End Distance:
Between 2.500 inches and 2.700 inches
Pin Center To Handle End Distance:
6.000 inches
MRC:
Indicates the type of device that is attached to the pin.CTDJ
Pin Attachment Type:
Ring
Detent To Tapered End Distance:
Between 1.620 inches and 1.660 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Shank and handle shall be capable of withstanding 360 in lbs torque in either direction over their entire length without yielding of material; indent, stamp or cast "lau-7 series in 1/4 inch characteriers on front of handle with mil-std-130; part shall be delivered with nas 1091-30 warner streamer assembly; indent, stamp or cast "slotted" on both sides of handle in 1/4 inch characters in accordance with mil-std-130; indent, stamp or cast "push" in 1/8 inch characters on from of handle in accordance with mil-std-130; break all sharp edges
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
L handle
