رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Shaft, pinion
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square (round corners)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 9.7300 inches and 9.7700 inches
MRC:
The distance from one flat to the opposite flat of the first end.ACKY
First End Width Across Flats:
0.7500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Los angeles class ssn (688)
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
2.0000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.4060 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.7495 inches and 0.7515 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
4
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
2.0000 inches
First End Step Length:
1.0000 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Shaft is splined 4.2500 inchs long x 1.0000 min. 1.0015 maximum inch diameter 2.0600 inchs from second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286 form-2 anl federal specification single material response
