رقم الجزء 596-7409351-27

Nonmetallic Angle

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 20.78 and 28.053 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
596-7409351-27
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014984820

معلومات الجزء
Drawing calls this: shim, center rail, slide; upper/longer leg has two holes, 0.281 through countersunk 0.560 x 82 degrees, centered 1.031 inch from top and 1.000 from each end; horizontal leg has three holes, 0.281 thru, cs 0.560 x 82 deg, centered 0.437 from l bend, spaced 3.000, 9.500, and 16.000 from left edge, and two pilot holes. 0.190 thru, centered on same lengthwise line, spaced 2.000 inches from each end

NSN
رقم المخزون الوطني:
9390-01-498-4820 9390014984820
TXT
وصف:
Nonmetallic Angle
INC
INC
رمز اسم العنصر:
30217
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
94.0 rockwell m
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
10 kilograms per square centimeter
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
257.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.092 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.781 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
19.000 inches
MRC:
None.ADXL
Left Side Flange Thickness:
0.188 inches
MRC:
None.ADXZ
Left Inside Angle In Deg:
90.0
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Weather resistant
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; plunger assembly
MRC:
None.AJGP
Base Flange Thickness:
0.218 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the base flange tip.BHQV
Base Flange Tip Style:
Base square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic, acetal-delrin composition 100 af

{lang[cimilar]} Nonmetallic Angles

« Miscellaneous Fabricated Nonmetallic Materials {lang[catalog]}
قارن الآن»
واضح | أخفى