رقم الجزء 596-7409876-2

Bumper

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 904.48 and 1221.048 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
596-7409876-2
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
015121637

معلومات الجزء
Part to be annealed prior to final machining; has lip at each short end: 0.23-0.25 in. Thick x 0.667 inch long; has center lengthwise groove: 0.250 in. Wide x 0.22 in. Deep with arcs at each end with radii of 0.125 and bottom arc centered 0.50 in. From bottom of part; part tapers from being 2.776-2.778 in. Wide on ungrooved surface to 2.281 in. Wide on other side; has 0.50 in. Hole drilled thru, centered 12.750 in. From bottom end and countersunk 0.54 in. X 90 deg. On ungrooved surface

NSN
رقم المخزون الوطني:
5340-01-512-1637 5340015121637
TXT
وصف:
Bumper
INC
INC
رمز اسم العنصر:
67806
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
17.085 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.281 inches and 2.778 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; gas processing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Drawing calls this: bearing, slider, atwartship

{lang[cimilar]} Bumpers

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى