رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
2nd leg has hole 0.710-0.730 in. Dia, with 3 holes eq sp and located on 1.250 in. Dia
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.942 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Tf33 pw102 engine, kc-135
Second Leg Corner Radius:
0.250 inches
First Leg Hole Diameter:
Between 0.276 inches and 0.286 inches
Second Leg Hole Diameter:
Between 0.214 inches and 0.224 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.064 inches and 0.076 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.064 inches and 0.076 inches
First Leg Distance Between Hole Centers Along Width:
0.036 inches
First Leg Distance Between Hole Centers Along Length:
1.030 inches
First Leg Distance From Edge To Hole Center Along Width:
0.312 inches
First Leg Distance From Edge To Hole Center Along Length:
0.312 inches
First Leg End Radius:
0.312 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5504 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
