رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Connection end type: hub
TXT
وصف:
Nonvehicular Universal Joint
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.500 inches
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Needle
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.500 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of an unthreaded securing hole,and terminates on the inside circumference.AMBG
Unthreaded Securing Hole Diameter:
0.315 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Included
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
180.0 degrees apart
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090