رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
* special requirements. EA
TXT
وصف:
Vehicular Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
2.248 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.3485 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.125 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
3.8125 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
2.045 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
3.000 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
5.250 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
1.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
6.093 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision:
Unthreaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Bearing Hole Diameter:
1.9375 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Hub
MRC:
The number of splines on the shaft.CZKU
Shaft Spline Quantity:
10
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Differential drive shaft, vehicular
