رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.520 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.750 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
180.0
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded all holes
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.0975 inches all holes
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
250 microinches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi/sae 4130
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard single material response or aisi 4130 assn standard single material response or sae 4130 assn standard single material response
