رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
W/integral speed control
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand and right-hand and right-hand
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
23.5 inch-pounds
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.417 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.533 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
0.281 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.281 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.375-24 and 0.563-18 and 0.563-18
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
8000.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.458 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, involute external
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Aluminum alloy
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf and unf and unf
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal and internal and internal
MRC:
A measurement of the longest dimension the shaft extends from the item.ARQA
Shaft Protrusion Length:
0.625 inches
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
24/48
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1 and 1 and 1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Drain
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Outlet
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
3000 psi at no specified temp range
MRC:
The design of the connection.AXFC
Connection Design:
Threaded and threaded and threaded
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.500 inches
MRC:
The government standard that covers the drive shaft.AXFM
Drive Shaft Government Standard:
And10263
MRC:
The government standard that covers the mounting.AXFN
Mounting Government Standard:
And10260
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
0.049 cubic inches
MRC:
The government specification and/or standard that specifically covers the connection.AZFE
Connection Government Specification/std:
And10050-3, and10050-6 and and10050-6
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
1.875 in. By 1.875 in. C to c
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.AZFH
Housing Surface Treatment:
Anodized
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Aircraft hydraulic system kc135
