رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Panel Screw Assembly
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.141 inches and 0.186 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.792 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.175 inches and 0.205 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Hexagon
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.112 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.078 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 secondary washer or steel comp 302b secondary washer or steel comp 303 secondary washer or steel comp 303 plus x secondary washer or steel comp 303se secondary washer or steel comp 303cu secondary washer or steel comp 303ma secondary washer or steel comp 304 secondary washer or steel comp 304l secondary washersteel comp 302 primary washer or steel comp 302b primary washer or steel comp 303 primary washer or steel comp 303 plus x primary washer or steel comp 303se primary washer or steel comp 303cu primary washer or steel comp 303ma primary washer or steel comp 304 primary washer or steel comp 304l primary washersteel comp 302 spring or steel comp 302b spring or steel comp 303 spring or steel comp 303 plus x spring or steel comp 303se spring or steel comp 303cu spring or steel comp 303ma spring or steel comp 304 spring or steel comp 304l springsteel comp 302 stand-off or steel comp 302b stand-off or steel comp 303 stand-off or steel comp 303 plus x stand-off or steel comp 303se stand-off or steel comp 303cu stand-off or steel comp 303ma stand-off or steel comp 304 stand-off or steel comp 304l stand-offsteel comp 302 fastener or steel comp 302b fastener or steel comp 303 fastener or steel comp 303 plus x fastener or steel comp 303se fastener or steel comp 303cu fastener or steel comp 303ma fastener or steel comp 304 fastener or steel comp 304l fastener
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
