رقم الجزء 621-2493-001

Shouldered Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 10.12 and 13.662 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
621-2493-001
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
010983050

معلومات الجزء
F1rst end circular, dia 0.380 in., with unthreaded hole 0.1245 in. Min, 0.1255 in. Maximum diameter by 0.530 in. Deep, has two rectangular tabs 0.090 in. Lg, 0.048 in. Min 0.050 in. Maximum w, 0.350 in. Min 0.045 in. Maximum h, extending from circumference on opposite edges of end toward center terminating 0.100 in. From center

NSN
رقم المخزون الوطني:
3040-01-098-3050 3040010983050
TXT
وصف:
Shouldered Shaft
INC
INC
رمز اسم العنصر:
22914
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Plain
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.010 inches and 1.020 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5826-01-015-0839
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.1861 inches and 0.1875 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Amdl and feat
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.380 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, class 303, condtn a federal specification single material response

{lang[cimilar]} Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى