رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
1.125 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
0.640 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
25.0 absolute and 10.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
3.0 pounds per square inch
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
4500.0 pounds per square inch
MRC:
Indicates the design type of the item.APGF
Design Type:
Reusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -420.0 degrees fahrenheit and 1000.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
4.625 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable seal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/out container
