رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
V-coupling-assembly
TXT
وصف:
Grooved Clamp Coupling
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
6.240 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Single
MRC:
Indicates the type of nut used in conjunction with the item.ALDS
Nut Type:
Self-locking double hexagon
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5732, comp 660 rivet err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5731, comp 660 washer err-100 err-100 or iron alloy, ams 5732, comp 660 washer err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5732, comp 660 bolt err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5732, comp 660 nut err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5732, comp 660 retainer err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting screw err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Silver, ams 2410 nut
MRC:
An indication of whether or not a drilled lockwire hole is included.ASXG
Drilled Lockwire Hole:
Not included
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
V-channel in both retainers, upper and lower, coated with graphite based dry-lube pl239; self-locking nut knurled; threads on bolt must be coated with moly grease per mcsa-9713; maximum width of coupling is 0.780 inches
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Locking nut plating silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The physical configuration of the item.SHPE
Shape:
Round
