رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Automotive Axle Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.563 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
38.0 rockwell c and 42.0 rockwell c
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
1.281 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
Between 0.940 inches and 0.950 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
Between 1.130 inches and 1.136 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
1.750 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
Between 0.904 inches and 0.909 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
Between 1.122 inches and 1.124 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Splined
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of first end spline(s) provided.BBCD
First End Spline Quantity:
6
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
10
MRC:
The length of a straight line which passes through the center of the facility on the first end,and terminates at the circumference.BNPJ
First End Facility Diameter:
0.805 inches
MRC:
The facility furnished on the first end for engaging,locking,and/or positioning the item.BNTB
First End Engaging/locking/positioning Facility:
Locking device groove
MRC:
A measurement taken at right angles to the length of the facility on the first end,in distinction from thickness.BNTC
First End Facility Width:
0.094 inches
MRC:
Indicates the location of the facility on the first end of the item.BNTD
First End Facility Location:
0.231 in. From shaft end
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Straight
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
Indicates the type of first end spline provided.BNYX
First End Spline Type:
Straight
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-624, fs4340-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624, fs4340-canceled federal specification single material response
