رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
If phenolic reinforcement is utilized, varnish exposed surfaces with mil-v-173 varnish ter mil-t-152
TXT
وصف:
Duplex Ball Bearing
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.6250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.0000 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
4.6250 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Machined
MRC:
The number of shields included on the item.AGYK
Shield Quantity:
2
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Angular
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.5
MRC:
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.CTHQ
Bearing Preload Rating:
Between 15.0 pounds and 25.0 pounds
MRC:
The size of the angle formed at the force point of contact.CTHY
Contact Angle:
Between 27.0 degrees and 33.0 degrees
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Fn 2, cagec 80070 mfr ref single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber fluorosilicone class fq shield and plastic phenolic shield or rubber fluorosilicone class fq shield and stainless steel shield
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-25988, type 1, class 1 military specification single material response shield
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response alignment ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response ball
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response outer ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
92c counterbored outer rings, non-separable, face to face mounting
