رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
65952-11409-101
معلومات الجزء
100 pct magnaflux rings and rollers; 100 pct fluorescent penetrant inspection of retainers; 100 pct etch inspection of rings and rollers; heat stabilized for operation from minus 65 degrees f to plus 300 degrees f
TXT
وصف:
Cylindrical Roller Bearing
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 2.3780 inches and 2.3800 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 4.2488 inches and 4.2496 inches
Inner Ring Width:
Between 4.0380 inches and 4.0430 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e52100 inner ring or steel comp 8620 inner ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e52100 roller or steel comp 8620 roller
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6444 assn standard 1st material response inner ring or ams 6276 assn standard 2nd material response inner ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6444 assn standard 1st material response roller or ams 6276 assn standard 2nd material response roller
