رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
First end center drilled hole 0.448 in. Nom. Dia, 0.079 in. Nom. Dp and three holes 0-80 nf-28 equally spaced on 0.800 in. Dia; second end 0.031 in. Diameter hole, 0.013 in. Dp, chamfered 60.0 degrees to outside surface
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
External threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.171 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
D220 mark ii inertial reference unit
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.8980 inches and 0.9000 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.1871 inches and 0.1873 inches
Second End External Thread Length:
Between 0.170 inches and 0.210 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
4
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.563 inches and 0.564 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, class b, cold drawn federal specification all material responses
