رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
4 recessed holes for 3 inch nps side; socket for 5 inch nps; smooth face to 125 ra ; test iaw mil-std-271
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
10.000 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
5.200 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
2.000 inches
MRC:
A measurement between specified points on the socket,in distinction from height.ABXN
Socket Depth:
1.030 inches
MRC:
The industrial designation or term used to define the nominal diameter of pipe for which the item is designed.ACSU
Pipe Size For Which Designed:
5.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Valves
Outer Bolt Circle Diameter:
6.625 inches
Inner Bolt Circle Diameter:
4.250 inches
Outer Bolt Circle Hole Diameter:
0.656 inches
Inner Bolt Circle Hole Diameter:
0.230 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Plain face, socket neck
MRC:
The number of holes provided on the outer bolt circle of the item.AJEN
Outer Bolt Circle Hole Quantity:
5
MRC:
The number of holes provided on the inner bolt circle of the item.AJEP
Inner Bolt Circle Hole Quantity:
3
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Machined
MRC:
The length of a straight line which passes through the center of an unthreaded reducer hole,and terminates at the inside circumference.CWAW
Unthreaded Reducer Hole Diameter:
3.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper and nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, cl a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, two bolt hole circles
