رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Eighteen mtg hole cbore farside 0.311 in. Min 0.318 in. Maximum diameter by 0.114 in. Min 0.120 in. Maximum dp; corner bevel 0.965 in. Lg by 0.473 in. W two places; two diagonal reiforcing ribs; molded in place gasket of electrically conductive elastomer 717806052, martin marietta corp; compression stops limit compressed height to 0.097 in. Min 0.107 in. Max
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.168 inches and 0.174 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.956 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.468 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
10.306 inches
Hole Quantity Along Length:
10
Hole Quantity Along Width:
8
Distance Between Holes Along Length:
1.995 inches
Distance Between Holes Along Width:
2.500 inches
Distance Between Hole Centerline And First Hole Along Length:
0.569 inches
Distance Between Hole Centerline And First Hole Along Width:
1.406 inches
Distance From First Hole Centerline To End Along Length:
0.778 inches
Distance From First Hole Centerline To End Along Width:
1.615 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.530 inches
First Recess Inside Height:
0.107 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.468 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11-t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
717806000, code 3405, martin marietta corporation mfr ref single treatment response
