رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
68a327161-2003
معلومات الجزء
With nas516-1 fitting mtd in end of flued hole
TXT
وصف:
Fluid Passage Bolt
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
1.500 inches
Distance From Centerline To Flat:
0.500 inches
Concentric Hole Depth:
1.485 inches
Concentric Hole Diameter:
0.120 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.496 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.541 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Round with wrench flats
First Diameter From Wrenching Feature:
0.624 inches
First Radial Fluid Hole Diameter:
0.078 inches
Distance From First Radial Hole Center To End Of Bolt:
1.446 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
2.396 inches
Wrenching Feature Height:
0.040 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
22000 pounds per square inch
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
18
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unjf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.625 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5629 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
