رقم الجزء 7-311610019-7

Angle Bracket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
7-311610019-7
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
016034775

معلومات الجزء
Angle, closing-engine bay louver, seal

NSN
رقم المخزون الوطني:
5340-01-603-4775 5340016034775
TXT
وصف:
Angle Bracket
INC
INC
رمز اسم العنصر:
16900
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.250 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.448 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
26.16 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.016 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.250 inches
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.75 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.00 inches
MRC:
The number of holes provided.ASXK
Hole Quantity:
8
MRC:
None.BPCJ
Distance Between Hole Centers:
3.00 inches
MRC:
None.CSSQ
First Leg Angle:
0.060 radians
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item has 8 slots along the same centerline, slot height: 0.448 inch; slot width: 0.25 inch and 3.00 inches apart along the 1.00 inch wide, holes and slots align centerline of 1st slot and hole is 0.75 inch from the end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-t-9046-b5al military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle

{lang[cimilar]} Angle Brackets

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى