رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
There are 8 holes csk 0.510 in. X 100 degrees thru, there are also 12 holes diameter 0.266 to 0.271 in. Through 2 walls, 10 holes diameter 0.040 in. Requiring solid rivets p/n ms20426ad3 that are installed iaw mil-std-403 w/exception that head of rivets to be 0.010 in. Below surface; item also requires 2 channel gang nuts p/n 7002549-5
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.261 inches and 0.266 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
27.540 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.250 inches and 0.260 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Amraam lau128 (forward)
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Special marking
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/11 type 2 t73510 or t73511 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 type 2 cl1 military specification single treatment response
