رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Ptin plate per mil-t-10727, type 1 if made from 1018/1020; there are eight holes that are 8-32 unc-2b; there are also 26 holes 6-32 unc-2b; there are 6 holes with dia. 0.7200 in and countersunk with a dia. Of 1.1250 in.
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2810 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
8.5000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
11.8800 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
1.0000 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
3.7500 inches
Distance Between Holes Along Width:
3.7500 inches
Distance Between Hole Centerline And First Hole Along Length:
1.9350 inches
Distance Between Hole Centerline And First Hole Along Width:
1.5300 inches
Distance From First Hole Centerline To End Along Length:
2.1850 inches
Distance From First Hole Centerline To End Along Width:
1.7800 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.2500 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1020 or stainless steel
