رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Damper spring encasement provision included; integral hub included
TXT
وصف:
Vehicular Clutch Disk
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.918 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.132 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.122 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.125 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.070 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.170 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
10.868 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location:
Both sides
MRC:
The physical configuration of the item.ARJD
Design Form:
Cushion segment
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Straight
MRC:
Indicates the type of disk.BPLM
Disk Type:
External slot
MRC:
The number of sections on each side of the item.BSPJ
Section Quantity Per Side:
6
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method:
Riveted
MRC:
The number of cushion segments provided.BSPM
Cushion Segment Quantity:
6
MRC:
The number of damper springs provided.BSPN
Damper Spring Quantity:
6
MRC:
The distance from the flywheel face to the rear of the hub.BSPT
Distance From Flywheel Face To Rear Of Hub:
0.500 inches
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
0.918 inches
MRC:
The angle between the slots,expressed in degrees.BSPY
Angle Between Slots In Deg:
60.000
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Friction material facing
MRC:
The structural characteristic of the item.CQCF
Construction:
Section
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.CYBJ
Disk Material:
Steel
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper bronze
