رقم الجزء 704-5795403ITEM22

Rod End Connector

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 100.74 and 135.999 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
704-5795403item22
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014990730

معلومات الجزء
End of tongue has 1.250 in by 45 degree bevel in two places; at rod end is 45 degree by 0.175 in chamfer

NSN
رقم المخزون الوطني:
5340-01-499-0730 5340014990730
TXT
وصف:
Rod End Connector
INC
INC
رمز اسم العنصر:
03439
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a stud end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand stud end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
4.500 inches stud end
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 2.350 inches and 2.351 inches
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
2.750 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
1.875 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
4.250 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
1.968 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
4.500 inches
MRC:
The physical configuration of the hole.BCLP
Hole Shape:
Round
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
8.750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 stud end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.875 inches stud end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un stud end

{lang[cimilar]} Rod End Connectors

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى