رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Unthreaded portion of shank offset 0.250 in. From fork centerline to centerline of threaded portion of shank
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.750 inches rod connection
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.498 inches and 0.501 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.125 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
0.470 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.562 inches
Distance From Pivot Pinhole Center To Rod Connection End:
4.690 inches
Fork Arm Thickness:
0.281 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.370 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches rod connection
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc and chromate or cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-z-325, type 2, class 3 federal specification 1st treatment response or qq-p-416, type 2, class 3 federal specification 2nd treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf rod connection
