رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Waveguide Assembly
MRC:
The angular measurement by which one part/section of a rigid item deviates from a straight line projection of an adjacent part/section,expressed in degrees.ACJL
Bend Angle In Deg:
90.0 single bend e-plane
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Tubing Wall Construction Style:
Seamless single tubing segment
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
Flange Inside Width:
1.253 inches and 1.256 inches all flanges
Flange Inside Height:
0.628 inches and 0.631 inches all flanges
Flange Outside Width:
1.860 inches and 1.890 inches all flanges
Flange Outside Height:
1.860 inches and 1.890 inches all flanges
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.423 inches and 0.453 inches all flanges
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.169 inches and 0.172 inches all flanges all connection facilities
Waveguide Outside Width:
Between 1.246 inches and 1.254 inches
Waveguide Inside Width:
Between 1.118 inches and 1.126 inches
Waveguide Inside Height:
Between 0.493 inches and 0.501 inches
Waveguide Outside Height:
Between 0.621 inches and 0.629 inches
Waveguide Longer Offset Distance:
Between 2.588 inches and 2.608 inches
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
4 unthreaded hole all flanges all connection facilities
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Cover type all flanges
Waveguide Offset Distance:
Between 1.890 inches and 1.910 inches
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid single tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy all flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Corner type
