رقم الجزء 70B184099-1001

Observation Window

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 44.68 and 60.318 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
70b184099-1001
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
012109053

معلومات الجزء
Four 0.113 in. Diameter hles each corner; two 0.250 in. Diameter holes at each end equally centered

NSN
رقم المخزون الوطني:
9330-01-210-9053 9330012109053
TXT
وصف:
Observation Window
INC
INC
رمز اسم العنصر:
16880
MRC:
The actual number of full layers of material.AAFW
Ply Quantity:
3
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.900 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.000 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.180 inches
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Translucent
MRC:
The temperature of the item at maximum operating pressure.AKTR
Tempurature At Maximum Operating Pressure:
Not rated
MRC:
The protection afforded by the material as rated by the thickness of sheet lead equivalent.AKVH
Radiation Protection Rating:
Not rated
MRC:
Wire mesh pattern is the definite pattern of twisted or welded wire.AKVN
Wire Mesh Pattern:
Square
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Flat finish
MRC:
The maximum pressure at which the item is designed to operate.BJDW
Maximum Operating Pressure:
Not rated
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
Not rated
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Not rated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic methyl methacrylate and nickle-copper alloy wire
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square corners

{lang[cimilar]} Observation Windows

« Plastics Fabricated Materials {lang[catalog]}
قارن الآن»
واضح | أخفى