رقم الجزء 712733-1

Annular Ball Bearing
توافر المخزون  رموز حالة المنتج

رقم الجزء 712733-1 في المخزون بالكميات والشروط التالية.

  • NE: 14
  • NS: 17
  • SV: 1

ملاحظة: تم آخر تحديث لتوفر هذا المنتج 04/30/2026 وربما تغيرت منذ ذلك الحين. اطلب عرض أسعار للأسعار المحدثة والتوافر.

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 41.38 and 55.863 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
712733-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
001982926

معلومات الجزء
Spressed stainless steel retainer heat treat parts per mil-h-6875; immediately after quenching, refrigerate parts at minus 120 to minus 90 degrees f for 2 hours; followed by tempering at a temp of plus 325 degrees f for 3 hours; repeat refrigeration and tempering steps at least once; final hardness should be rockwell c-58 min; ff-b-171 applies except for bearing type and dimensions; all other attributes of this bearing are i/a/w ff-b-171 qap eq003 applies source inspection required

NSN
رقم المخزون الوطني:
3110-00-198-2926 3110001982926
TXT
وصف:
Annular Ball Bearing
INC
INC
رمز اسم العنصر:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.2812 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.2500 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
0.7500 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The number of shields included on the item.AGYK
Shield Quantity:
2
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Standard
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.3
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Pressed stainless steel retainer heat treat parts per mil-h-6875; immediately after quenching, refrigerate parts at minus 120 to minus 90 degrees f for 2 hours; followed by tempering at a temp of plus 325 degrees f for 3 hours; repeat refrigeration and tempering steps at least once; final hardness should be rockwell c-58 min; ff-b-171 applies except for bearing type and dimensions; all other attributes of this bearing are i/a/w ff-b-171 qap eq003 applies source inspection required
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Grease
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Mil-g-23827 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-loading groove, non-separable

{lang[cimilar]} Annular Ball Bearings

« Bearings Antifriction Unmounted {lang[catalog]}
قارن الآن»
واضح | أخفى