رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Proof of pressure 2.2 psi
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.050 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.000 inches first end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mcdonnell douglas c17-a aircraft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
1.000 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Round both ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Soft both ends
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
2.500 inches both ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
1.1 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
4.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass reinforcing cord
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr 1st ply and fiberglass 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr 2nd ply and fiberglass 2nd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel reinforcing wire
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, class 2, grade 60 military specification single material response 1st ply
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, class 2, grade 60 military specification single material response cover
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-461 federal specification single material response reinforcing wire
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Helically wound continous wire supported
