رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Second end external thd 0.190-32unf-3a 0.420 in.Lg; cross drilled hole 0.078 in. Diameter located 0.215 in. From end
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.0600 inches
First End Groove Diameter:
0.1770 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and flatted
Second End Groove Width:
0.0600 inches
Second End Groove Diameter:
0.1770 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.125 inches
First End Distance From End To Groove:
0.6000 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.2500 inches
First End External Thread Length:
0.6000 inches
Second End Flat Depth:
0.0235 inches
MRC:
A measurement of the longest dimension of the flat at the second end,in distinction from width.AMFP
Second End Flat Length:
0.9200 inches
Second End Distance From End To Groove:
0.9200 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.1900 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a320 assn standard single material response
