رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.238 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.120 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
2.562 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.280 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.500 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
123 or 138
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.002 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 1100 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/1, h19 federal specification 1st material response or qq-a-250/8, h39 federal specification 2nd material response
