رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Protective plate
TXT
وصف:
Shipping And Storage Wear Plate
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
19.820 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
20.100 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mk 14 mod 2, cannister
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
R0.075 in. Thick; rectangular; with long side down, has cutouts on each top corner: 0.65 in. W x 0.75 in. D, and larger cutouts at same corners: 4.80 in. W x 3.070 in. Deep: top edge rolls back with radius of 0.18 in. For length of 0.25 in.; has 6 mounting holes, 0.375 inch in dia: 2 near top edge: 7.547 and 12.453 in. From left outside edge and 18.280 inch from bottom edge and 4 holes 0.750 inch from bottom edge and 3.448, 7.848, 12.248 and 16.848 inches from left edge
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
53711-7251124-1 iaw mil-std-130 in characters approx. 0.19 in.
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint side from which top rolls back per ws19201, gr f and other side coat per ws20168, overspray onto edges and holes is permitted
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Has 3 more holes, 0.500 inch in dia: 1 near top, 0. Edge: 18.280 in. From bottom edge and 6.750 in. From left edge and 2 holes 3.750 in. From bottom, 4.350 and 6.750 in. From left edge
