رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One bolt hole 0.230 in. Dia; four bolt holes 0.125 in. Kia+ one slot 0.655 in. Long by 0.093 in. Wide
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.090 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.380 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.380 inches
Outside Corner Radius:
0.130 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.125 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.125 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.127 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.127 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.016 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Asbestos
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
A-56, fscm 94878 mfr ref single material response
