رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.311 inches and 0.312 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.905 inches and 0.910 inches
Undercut Diameter:
Between 0.190 inches and 0.195 inches
Under Head Length:
Between 1.030 inches and 1.060 inches
Undercut Width:
Between 0.040 inches and 0.060 inches
Second Undercut Width:
Between 0.080 inches and 0.085 inches
Second Undercut Diameter:
Between 0.290 inches and 0.300 inches
First End Taper Length:
Between 0.015 inches and 0.030 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.385 inches and 0.390 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.092 inches and 0.102 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp o1
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove